Before Using For The First Time; Basic Settings; Setting The Language; Setting Up Miele@Home - Miele PFD 101 Mode D'emploi Abrégé

Basic settings

Switching on the dishwasher
 Switch the dishwasher on using the
 sensor control.
The welcome screen will appear when
the dishwasher is switched on and the
welcome melody will sound.

Setting the language

The display will then change automatic-
ally to the screen for setting the lan-
guage.
 Select the language you want as well
as the country, if appropriate, using
the  sensor control and confirm
with OK.
A tick  will appear next to the lan-
guage that has been set.

Setting up Miele@home

The message Miele@home
on the display.
 To set up Miele@home now, confirm
by touching OK.
Tip: To postpone setup until later, select
the option Skip and confirm by touching
OK.
There are two ways of connecting your
dishwasher to your WiFi network:
 Select the connection method you
want and confirm your choice with
OK.
1. Connect using App
2.
Connect using WPS
(WPS = WiFi Protected Setup)
You will then be guided by the display
and the relevant Miele app.
en - Before using for the first time

Setting the time of day

The display will then change to the
screen for setting the time of day.
The current time of day must be set be-
fore you can use the timer option.
 Use the  sensor controls to enter
 Then set the minutes and confirm

Setting the water hardness

The display will change to the screen
for setting the water hardness.
will appear
- You should programme the dish-
- Your local water authority will be able
- Where the water hardness fluctuates,
In the event of a fault, it will help the
service technician if you know the water
hardness of your local water supply.
Therefore, please enter the water hard-
ness:
The time of day is set automatically if
a connection is established with the
WiFi network.
the hour and confirm your entry by
touching OK.
with OK.
Holding down the relevant  or
 sensor control will increase or de-
crease the time automatically.
washer to the correct water hardness
for your area.
to advise you on the water hardness
level in your area.
e.g. between 1.8 and 2.7 mmol/l (10–
15 °dH – German scale), always pro-
gramme the dishwasher to the higher
value (2.7 mmol/l or 15 °dH in this ex-
ample).
39