Display Of Programme Running Time; Starting The Programme - Miele PFD 101 Mode D'emploi Abrégé

en - Operation
Display of programme running
time
The estimated duration of the pro-
gramme selected appears in the display
before the programme begins. During
the programme, the time left until the
end of the programme is displayed.
Symbols appear to indicate which stage
the programme is at:

Pre-wash/Soak

Main wash

Interim rinse

Final rinse

Drying

Finished
The displayed duration may vary for the
same programme. It is influenced by,
for example, the temperature of the in-
coming water, the reactivation cycle of
the water softener, the detergent type,
the amount of crockery and how soiled
it is.
When a programme is selected for the
first time, the display will show the aver-
age running time for a cold water con-
nection.
For each programme sequence, the
control module calculates the pro-
gramme running time according to the
temperature of the incoming water and
the amount of crockery.
46

Starting the programme

 Touch the Start sensor control.
Confirm the previously displayed
messages with OK.
The programme starts.
The Start sensor control lights up.
During the programme sequence, you
can use OK to display the name of the
programme that is currently running.

Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.