Publicité
Les langues disponibles
Les langues disponibles
Connect to the Instrument via USB
The following figure illustrates a typical USB interface system.
1. Connect your instrument to the USB port on your computer using a USB cable.
2. With the Connection Expert Utility of the Keysight IO Libraries Suite running, the computer will automatically recog-
nize the instrument. This may take several seconds. When the instrument is recognized, your computer will display
the VISA alias, IDN string, and VISA address. You can also view the instrument's VISA address from the front panel
menu.
3. You can now use Interactive IO within the Connection Expert to communicate with your instrument, or you can pro-
gram your instrument using the various programming environments.
The USB cable is not recommended to be longer than 3 meters.
Connect to the Instrument via LAN (Site and Private)
Site LAN
A site LAN is a local area network in which LAN-enabled instruments and computers are connected to the network
through routers, hubs, and/or switches. They are typically large, centrally-managed networks with services such as
DHCP and DNS servers. The following figure illustrates a typical site LAN system.
1. Connect the instrument to the site LAN or to your computer using a LAN cable. The as-shipped instrument LAN set-
tings are configured to automatically obtain an IP address from the network using a DHCP server (DHCP is ON by
default). The DHCP server will register the instrument's hostname with the dynamic DNS server. The hostname as
well as the IP address can then be used to communicate with the instrument. The front panel LAN indicator will
come on when the LAN port has been configured.
38
Keysight EDU33210 Series User's Guide
Publicité
