Publicité
Les langues disponibles
Les langues disponibles
2. Press [Parameter] > High Level. Using the numeric keypad or knob and arrows, select a value of 1.0 V. (If you are
using the keypad, you will need to select the V unit softkey to enter the value.)
3. Press the Low Level softkey and set the value. Again, use the numeric keypad or the knob to enter a value of 0.0 V.
These settings (high-level = 1.0 V and low-level = 0.0 V) are equivalent to setting an amplitude of 1.0 Vpp and an
offset of 500 mV.
30
Keysight EDU33210 Series User's Guide
Publicité
