Trigger Out Signal - Keysight Technologies Trueform EDU33210 Serie Guide D'utilisation

To specify the slope of the trigger signal edge: Press [Trigger] > Trig Out Setup > Trig Out
SCPI Command
TRIGger[1|2]:SOURce {IMMediate|EXTernal|TIMer|BUS}
TRIGger[1|2]:SLOPe {POSitive|NEGative}
See Triggering for more information.

Trigger Out Signal

See Trigger Output Signal
130
for more details.
Off | (Up) | (Down).
Keysight EDU33210 Series User's Guide