Publicité
Les langues disponibles
Les langues disponibles
Front Panel Operations
1. Press [Waveform] > Pulse.
2. Press [Modulate] > Type
Use the numeric keypad or the knob and arrows to set a desired value. If you use the keypad, select a prefix unit to
finish.
SCPI Command
[SOURce[1|2]:]PWM:INTernal:FREQuency {<frequency>|MINimum|MAXimum|DEFault}
Width or Duty Cycle Deviation
The PWM deviation setting is the peak variation in width of the modulated pulse waveform. You can set it in units of
time or duty cycle.
Front Panel Operations
1. Press [Waveform] > Pulse.
2. Press [Modulate] > Type
you use the keypad, select a prefix unit to finish.
To set deviation in terms of duty cycle:
1. Press [Units]
>Width
2. Press [Modulate] > Duty Cycle. Use the numeric keypad or the knob and arrows to set a desired value. If you use the
keypad, press Percent to finish.
SCPI Command
[SOURce[1|2]:]PWM:DEViation {<deviation>|MINimum|MAXimum|DEFault}
Keysight EDU33210 Series User's Guide
PWM
> PWM Freq.
PWM
> PWM Dev. Use the numeric keypad or the knob and arrows to set a desired value. If
Duty Cyc > Width
Duty
Cyc.
115
Publicité
