Publicité
Les langues disponibles
Les langues disponibles
Select View List to view the list parameters. You can edit (Edit Freq) the frequency value in the sweep list, add (Add
Freq) or delete (Delete Freq) a frequency value, and reorder the sweep list (Reorder List).
If you have a external USB flash drive connected, press Save List to save the sweep list to the external USB flash
drive.
To retrieve a previously saved sweep list from the connected external USB flash drive, press Select List.
SCPI Command
[SOURcd[1|2]:]FREQuency:MODE LIST
[SOURce[1|2]:]LIST:FREQuency <freq1>[, <freq2>, etc.]
Progress through list is controlled by the trigger system. If trigger source is internal or immediate, the dwell time
setting (LIST:DWELl) determines time spent at each frequency. For any other trigger source, dwell time is
determined by trigger event spacing.
132
Keysight EDU33210 Series User's Guide
Publicité
