Maintenance Work; Inspection Intervals; Transportation, Storage, Disposal - Burkert 2030 Mode D'emploi

Type 2030, 2031, 2031 K, 2032,
2033, 2037
7.4

Maintenance work

7.4.1 Actuator
The actuator of the diaphragm valve is maintenance-free provided it is
used according to these operating instructions.
7.4.2 Wearing parts of the diaphragm valve
Parts which are subject to natural wear:
• Seals • Diaphragm
→
If leaks occur, replace the particular wearing part with an appro-
priate spare part.
For the maintenance and repair instructions see operating
instructions (DN65 - DN100) on the Internet at:
www.burkert.com
A distended PTFE diaphragm may reduce the flow-rate.
7.4.3

Inspection intervals

→
Check diaphragm for wear after a maximum 10
operations.
Muddy and abrasive media require correspondingly shorter
inspection intervals!
All manuals and user guides at all-guides.com
Assembly
switching
5
8 TRANSPORTATION, STORAGE,
DISPOSAL
NOTE!
Transport and storage damage!
• Protect the device against moisture and dirt in shock-resistant
packaging during transportation and storage.
• Permitted storage temperature: -40 – +55 °C.
Damage to the environment caused by device components
contaminated with media.
• Dispose of the device and packaging in an environmentally
friendly manner!
english
13