Maintenance Work; Replacement Parts - Burkert 2101 Mode D'emploi

9

MAINTENANCE WORK

→ Complete a visual inspection of the equipment once a year.
Shorter maintenance intervals may be recommended depending
on the operating conditions.
Visual inspection:
Perform regular visual inspections according to the application
conditions:
→ Check media connections for leaks.
→ Check release bore on the tube for leaks.
Fig. 8: Release bore
9.1

Replacement parts

CAUTION!
Risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable replacement parts may
cause injuries and damage the device and the surrounding
area.
▶ Use only original accessories and original replacement parts
from Bürkert.
16
Release bore
english
Type 2101
Maintenance work
Wearing parts: Seals and the swivel plate.
→ In the event of a leak, replace the relevant wear part.
The maintenance and repair instructions are available on
the Internet: country.burkert.com