Intended Use; Basic Safety Instructions - Burkert 2030 Mode D'emploi

3

INTENDED USE

Incorrect use of the Type 2030, 2031, 2031 K, 2032, 2033 and
2037 can be dangerous to people, nearby equipment and the
environment.
The diaphragm valve of Type 2030 is designed for the control of
contaminated and aggressive media. The valves of types 2031,
2031 K, 2032, 2033 and 2037 can also be used with ultrapure or
sterile media with higher viscosity.
▶ In the potentially explosion-risk area the type 2030, 2031, 2031
K, 2032, 2033 and 2037 may be used only according to the
specification on the separate Ex type label. For use observe the
additional information enclosed with the device together with
safety instructions for the explosion-risk area.
▶ Devices without a separate Ex type label may not be used in a
potentially explosive area.
▶ Observe the permitted usage conditions for the equipment.
▶ Only operate when in perfect condition and always ensure
proper storage, transportation, installation and operation.
▶ Secure system/equipment against unintentional activation.
▶ Only feed fluids into the media connections that are specified in
section „6 Technical Data".
▶ Do not make any internal or external changes to types 2030, 2031,
2031 K, 2032, 2033 and 2037. Secure equipment/device against
unintentional actuation.
▶ Only trained technicians may perform installation and maintenance
work.
▶ After an interruption in the power supply, ensure that the process
is restarted in a controlled manner.
▶ Do not subject the body to mechanical loading.
▶ Observe the general accepted technical rules.
4
All manuals and user guides at all-guides.com
english
Type 2030, 2031, 2031 K, 2032,
Intended Use
3.2 Restrictions
If exporting the system/device, observe any existing restrictions.
4

BASIC SAFETY INSTRUCTIONS

These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
Danger – high pressure!
▶ Turn off the pressure and vent the lines before loosening lines or
valves.
Risk of electric shock!
▶ Before reaching into the device or the equipment, switch off and
lock the power supply to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of burns!
The surface of the equipment can become hot during continuous
operation.
▶ Do not touch the device with bare hands.
Danger of bursting from overpressure!
▶ Observe the specifications on the type label for max. control and
medium pressure as well as the permitted medium temperature.
To prevent injuries/damage:
▶ Secure system/equipment from unintentional activation.
2033, 2037