Aux In Mode - auna V-14 DAB Mode D'emploi

Note: If your device should be come unpaired for any reason, follow the
steps above to 'pair' it again. You can short press the Pair button on the
remote control to restart the BT pairing process.
Listening to Music/Audio using BT
In BT Mode:
1. Select and start the music or audio that you wish to listen to on your
paired BT device, it will now be heard through the Micro speakers.
Adjust the volume on the connected device and/or your Micro.
Note: If your previously paired device is within range but does not
automatically connect, go to the BT connectivity settings on your device
and select V_14 DAB to reconnect. Alternatively, short press the Pair
button on the remote control to restart the BT pairing process.
2. You can use the controls on your paired BT device as well as those on
the front of the Micro or on the remote control when listening to music
via BT.
Controls available on your Micro and the remote control are:
Play/Pause
Short press on the front of the Micro or on the remote control.
Skip back to the previous track
Short press on the front of the Micro. Short press on the remote control.
Skip forward to the next track
Short press on the front of the Micro. Short press on the remote control.

AUX IN MODE

Check that your Micro is in Aux in mode. If you are not already in Aux in
mode, short press the Mode button on the front of the Micro or on the
remote control, until you are in Aux in mode (check the display).
Using a 3.5mm audio input connection cable (not included), Aux in allows
for a quick and easy connection to an external sound source.
EN
53