Using The Alarms - auna V-14 DAB Mode D'emploi

USING THE ALARMS

Note: Check that your Micro has the correct time before you set an
alarm. Please remember to use 24 hour clock.
1. Long press the Menu button on the Micro or on the remote control. Use
the buttons on the Micro or on the remote control to scroll to
/
system. Short press the select button.
2. ALARM is displayed. Short press the Select button. Use the
buttons on the remote control to scroll to Alarm. Short press the Select
button.
3. Alarm 1 is displayed. You can use the or buttons
on the remote control to scroll and set Alarm 2, if required. Short press
the Select button.
4. The hour digits will flash. Use the
the remote control to set the hour for your alarm. Short press the Select
button.
5. The minute digits will flash. Use the
the remote control to set the minutes for your alarm. Short press the
Select button.
6. The duration for your alarm will flash. Use
or on the remote control to set the duration for you alarm. You can
choose from 15, 30, 45, 60, or 90 minutes. Short press the Select button.
7. The sound source for your alarm will flash. Use the
the Micro or on the remote control to set the sound source for your
alarm. You can choose from Buzzer, DAB or FM radio. Short press the
Select button.
Note: If you select DAB or FM for the sound source, 'Last' will flash in the
display. If you have set radio station presets these will also be available
and you can use the or buttons on the Micro or the or buttons on the
remote control to scroll through the options available and press the Select
button. The last listened to radio station or radio preset in DAB or FM, as
appropriate, will be used for your alarm.
on the Micro or
/
buttons on the Micro or the on
/
buttons on the Micro or on
/
buttons on the Micro
/
/
/
buttons on
EN
41