Copying From A Camcorder - Samsung DVD-R160 Manuel D'instructions

To pause recording
Press the PLAY/PAUSE (
recording in progress.
Press the PLAY/PAUSE (
recording.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RAM/DVD±RW/ DVD±R discs,
the message 'Updating the information of disc.
Please wait for a moment.' is displayed.
You can not change the recording mode
s
and input source during recording.
NOTE
Recording will stop automatically if there is
s
no free space left for recording.
Up to 99 titles can be recorded onto a
s
DVD-RAM/-RW/-R disc, and up to 48 titles
onto a DVD+RW/+R disc.
Recording will stop automatically if a copy
s
protected image is selected.
If you are using a Cable Box(no antenna),
s
you cannot watch a different cable TV
program from the one you're recording.
DVD-RAM/DVD
s
be formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
s
this unit.

Copying from a Camcorder

You may control a Digital Camcorder using the IEEE1394
(DV) interface.
Before you start
Check that the disc has enough available space for the
recording. Adjust the record mode. See pages 27 to see
how to connect the camcorder to your DVD recorder.
Press the OPEN/CLOSE button, and place a
1
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close the disc tray.
2
Wait until "LOAD" disappears from the front panel display.
42 - English
) button to pause
) button again to resume
RW/ DVD+R discs must
±
3 Press the REC MODE button repeatedly to select
the recording speed(quality).
© SP © LP © EP © XP
Record Mode XP (01:11)
4 Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables Digital camcorder control appears on the top
of the screen.
DV
The DV device is connected
MOVE SELECT
Select the PLAY ( ) icon on the upper part of the
5 √
screen to playback the camcorder and find the starting
position to copy.
6 To start recording, select REC( ) icon in the top side
of the screen using the œ √ buttons, then press the
ENTER button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RAM/DVD±RW/ DVD±R discs,
the message 'Updating the information of disc.
Please wait for a moment' is displayed.
You can not change the record mode and
s
input source while recording.
NOTE
Recording will stop automatically if there is
s
no free space left for recording.
Up to 99 titles can be recorded onto a
s
DVD-RAM/-RW/-R disc, and up to 48 titles
onto a DVD+RW/+R disc.
DVD-RAM/DVD
s
be formatted before starting to record.
Most new discs are sold unformatted.
Do not use DVD-R authoring discs with
s
this unit.
To access on-screen controls during
s
recording, press the œ or √ buttons.
When copying from a camcorder and the
s
end of the tape is reached (no Video), the
screen may turn blue or purple.
RETURN
q
RW/ DVD+R discs must
±