Clock Set - Samsung DVD-R160 Manuel D'instructions

• When you press the Anynet+ button on the TV's
remote control, the OSD below will appear.
- Select device: Use this option to select device.
- Record: Use this option to record.
- Device Operation : Same as ANYKEY button (
on the DVD Recorder remote control.
- Menu on Device: Same as MENU button (
DVD Recorder remote control.
By pressing the PLAY button of the recorder
s
while watching TV, the TV screen will change
to the play screen.
NOTE
If you play a DVD when the TV power is off,
s
the TV will power on.
If you turn the TV off, the DVD Recorder will
s
power off automatically. (When the DVD
Recorder is recording, it can't be power off.)
If you change the HDMI to other sources
s
(Composite,Component,RF...etc)on yourTV
while playing a DVD disc,theDVD Recorder
will stop playing.The DVD Recorder may
keep playing certain discs based on their
content.
32 - English

Clock Set

Auto Clock Set
This menu is used to set the current time. You must set
the time first to use timer recording.
)
1 With the unit in Stop mode/No Disc mode, press the
MENU button.
) on the
Select Clock Set using the ...† buttons, then press
2
the ENTER or √ button.
Clock Set menu will be displayed.
Select Auto Clock Set using the ...† buttons, then
3
press the ENTER or √ button.
4 Select the sub menu(Clock Data CH, Time Zone
or Daylight Saving) using the ...† buttons, then
press the ENTER or √ button.
s The Menus are slightly different depending on whether a
disc is inserted or not .The menus described on the
NOTE next few pages are with no disc in the unit.
s The menus are not available during playback or recording.
Clock Data CH
Select a channel that carries a time signal using the
...† buttons then press the ENTER button.
•
Select Auto to set the clock data channel automatically.
DVD-Recorder

Clock Set

No Disc
Timer Rec. Auto Clock Set
Manual Clock Set
Setup
MOVE ENTER RETURN EXIT
DVD-Recorder Auto Clock Set
No Disc
Timer Rec. Clock Data CH : Automatic
Time Zone : Automatic
Setup
Daylight Saving : Automatic
MOVE ENTER RETURN EXIT
√ √
√ √
√ √
√ √
√ √