Quick Recording Setting; Anynet+ (Hdmi-Cec) - Samsung DVD-R160 Manuel D'instructions

Quick Recording Setting

It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this
initialization process, you can set the Quick Recording
feature to On. This enables you to record immediately
without having to wait for the disc to load.
With a disc inserted and the unit in Stop mode, press
1
the MENU button on the remote control
Select Setup using the ...† buttons, then press the
2
ENTER or √ button.
You can't use the Setup functions while playing a disc.
Select System using the ...† buttons, then press the
3
ENTER or √ button.
System menu will be displayed.
Select Quick Recording using the ...† buttons, then
4
press the ENTER or √ button.
Quick Recording menu will be displayed.
Select On using the ...† buttons, then press the
5
ENTER or √ button.
DVD-Recorder
DVD-RW(VR)
CM Skip Time
Title List
EP Mode Time
Playlist
Chapter Creator
Disc Manager
Quick Recording
Timer Rec.
Anynet+(HDMI-CEC) : On
Setup
MOVE ENTER
The Quick Recording is set to Off as
s
default.
NOTE
System
: 15 Sec
√ √
: 6 Hours
√ √
: Off
√ √
: Off
√ √
√ √
RETURN
EXIT

Anynet+ (HDMI-CEC)

Anynet+ is a function that can be used to operate the
recorder using a SAMSUNG TV remote control, by
connecting the DVD Recorder to a SAMSUNG TV using
an HDMI cable. (See page 18) This is only available
with SAMSUNG TVs that support Anynet+.
1 With the unit in stop mode/No disc mode,press the
MENU button on the remote control.
Select Set up using the
2
√
the ENTER or button.
Select System using the
3
√
the ENTER or button.
The System menu will be displayed.
Select Anynet+(HDMI-CEC) using the
4
buttons, then press the ENTER or
Anynet+(HDMI-CEC) items will be displayed.
...†
Select On using the
5
√
ENTER button or button.
DVD-Recorder
DVD-RW(VR)
Title List
CM Skip Time
EP Mode Time
Playlist
Chapter Creator
Disc Manager
Quick Recording
Timer Rec.
Anynet+(HDMI-CEC) : On
Setup
MOVE ENTER
Using Anynet+(HDMI-CEC)
1 Connect the recorder to a Samsung TV with an
HDMI cable. (See page 18 )
2 Set the Anynet+(HDMI-CEC) to "On" on your DVD
Recorder.(see above)
3 Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
•
You can operate the DVD Recorder by using the TV
remote control
.
(Available TV buttons:
buttons, ~
...†
buttons, then press
...†
buttons, then press
...†
√
button.
buttons, then press the
System
: 15 Sec
√ √
: 6 Hours
√ √
: Off
√ √
: Off
√ √
Off
√ √
On
RETURN EXIT
, , , , and
button)
English - 31