Video (Display) Setting; Tv Aspect - Samsung DVD-R160 Manuel D'instructions

Select Setup using the ...† buttons, then press
2
the ENTER or √ button.
Select Audio using the ...† buttons, then press
3
the ENTER or √ button.
4 Select the sub menu(Digital Output, DTS,
Dynamic Compression) using the ...† buttons,
then press the ENTER or √ button.
DVD-Recorder
No Disc
Timer Rec. Digital Output
DTS
Setup
Dynamic Compression: On
MOVE ENTER
Select the item that matches the audio connection
you've selected on pages 23-25(Method 1, 2 and3).
Digital Output
• PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system supports stereo
and/or Dolby Prologic.
•
Bitstream : Outputs Bitstream.
Select Bitstream if your amplifier system supports multi
channel digital audio surround decoding such as Dolby
Digital and/or DTS.
DVD-Recorder
No Disc
Timer Rec. Digital Output
DTS
Setup
Dynamic Compression: On
MOVE ENTER
DTS
•
On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp
with a DTS decoder.
• Off : Doesn't output DTS bitstream .
•
When DTS soundtrack is played, sound is not output
from the Analog Audio Output.
DVD-Recorder
No Disc
Timer Rec. Digital Output
DTS
Setup
Dynamic Compression: On
MOVE ENTER
Audio
: PCM
√ √
: Off
√ √
√ √
RETURN
EXIT
Audio
: PCM
PCM √ √
: Off Bitstream
√ √
√ √
RETURN EXIT
Audio
: PCM
√ √
: Off Off
√ √
On
√ √
RETURN EXIT
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
• On : When movie soundtracks are played at low
volume or from small speakers, the system can apply
appropriate compression to make low-level content
more intelligible and prevent dramatic passages from
getting too loud.
•
Off : You can enjoy the movie with standard Dynamic
Range.
DVD-Recorder
No Disc
Timer Rec. Digital Output
DTS
Setup
Dynamic Compression On
MOVE ENTER
Select the desired item(PCM, Bitstream, DTS-
5
Off, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the ...†
buttons
Then press the ENTER or √ button.

Video (Display) Setting

This allows you to set up the TV screen settings.

TV Aspect

1 With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
Select Setup using the ...† buttons, then press
2
the ENTER or √ button.
Select Video using the ...† buttons, then press
3
the ENTER or √ button.
Select TV Aspect using the ...† buttons, then
4
press the ENTER or √ button.
Select the desired item(4:3 Letter Box, 4:3 Pan-
5
Scan or 16:9 Wide) using the ...† buttons.
Then press the ENTER or √ button.
Audio
: PCM
√ √
: Off
√ √
Off √ √
On
RETURN EXIT
English - 35