CAME SALOON Manuel D'installation page 44

Command and control devices
Black
Red
Black
Red
Other connections
The R700 decoding cards are for controlling the turnstile fitted with the TSP00/LT001 sensors, the
save and upload of the settings including the registered users in another card.
For proper operation, before fitting any plug-in card (e.g.: the AF or the R700) YOU MUST CUT OFF THE MAIN
POWER SUPPLY and disconnect any emergency batteries.
LT001
Contact (N.O.) of the second SENSOR 2 control device (Transponder or
card reader with R700 card)
Contact (N.O.) of the fi rst SENSOR 1 control device (Transponder or card
reader with R700 card)
S1 GND S1 GND C NO1 NO2
TSP00
Stop button (N.C. contact) - For stopping the turnstile
while excluding the automatic closing cycle. To
resume movement, press the control button.
N.B.: if the contact is unused, select 0 (Deacti-
vated) in function F 1.
Contact (N.O.) for opening devices. For
details see function F 54.
Contact (N.O.) for closing devices. For details
see function F 54.
Contact (default: NC) for safety devices. For details
see functions F2, F54 and F72.
Contact (default: NC) for safety devices. For details
see functions F3, F54 and F72.
to
Memory Roll