Fastening the turnstile to the ground
Position the base on the anchoring spot and level it, if necessary, by using the adjusting screws.
NETWORK POWER SUPPLY 230V AC (Factory
configuration)
1
EMC fi lter
L
2
Connect the line power supply to the card terminal
housed in the back of the central column.
Ref.
Description
Neutral
Ⓝ
Line
Ⓛ
Ground
RED cable: power supply 230 V AC to
①
transformer (line fuse 1.6 A-F)
BLACK CABLE: power supply at 120 V AC
②
to transformer (line fuse 3.15 A-F)
N
Power supply cable
NETWORK POWER SUPPLY 120V AC
(Invert cables 1 and 2 as shown)
2
1