Electrical Connection - Gaggia EVOLUTION E90 Mode D'emploi Et D'entretien

English
Before connecting the water
softener to the machine, wash
the machine until the water is
clear.
Connect the drain cup (H) to the drainage pipe (B).
Should the mains pressure be
higher than 0,5 MPa a
pressure reducer balanced for
high pressure should be
installed (device in which any
mains pressure increase does
not effect
pressure).
The new hose-sets supplied
with the appliance are to be
used and that old hose-sets
should not be reused.
52
the output
5.2

Electrical connection

Before proceeding
electrical connection it is
necessary to check to
ensure that the voltage
rating corresponds with
that indicated on the CE
plate and
connection plate on the
power supply cable. Check
to ensure that the electrical
supply line is able to
support the machine load
(see chap.
features").
Connect to an earthing socket which complies with
current legislation.
Check that the power
supply cable is efficient and
that it complies
national and
safety standards.
The user must undertake to
power the
protecting the power line
using a suitable safety switch
(cut-out) that complies with
the legislation in force in the
actual country itself.
with
on the
"technical
with
European
machine