Protection Function; Installation And Adjustment - Oceanic OCEACLIM120W Mode D'emploi

8. press the key to switch between Celsius and Fahrenheit.
9. Sleep Mode: Press
IV. Protection function
3.1、Frost Protection Function:
In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust pipe is too low, the
machine will automatically enter protection status; if the temperature of the exhaust pipe rises to a certain temperature,
it can automatically revert to normal operation.
3.2、Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an alarm, and the
"FULL" indicator light will flash. At this point, you need to move the drainage pipe connecting the machine or the
water outlet to sewer or other drainage area to empty the water (details see
chapter). After the water is emptied, the machine will automatically return to the original state.
3.3 Automatic Defrosting (cooling models have this function): The machine has automatic defrosting function.Defrosting
can be achieved through four - way valve reversing.
3.4、Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after the
compressor is turned off.
V.Installation and adjustment
1.Installation：
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the air conditioning is in the upright
position and the air conditioning should be placed on a flat surface. Do not install and use the air conditioning in the bathroom or
other humid environments.
1.1 Install the heat pipe assembly （as shown in Fig.1）
1）take out the outer connector assembly and the exhaust pipe assembly, and remove the plastic bags;
the key to turn on the sleep mode.
Figure 1
9
Drainage Instruction
s at the end of this