Assembly
Use a suitable funnel or a filler pipe when refuel-
ling so that no fuel is spilled on the engine, the
deck or the ground.
For safety reasons, the fuel tank cap and other
tank caps must be renewed if damaged.
Do not start the engine if the fuel has overflowed.
The ride-on mower must be removed from the ar-
ea contaminated by fuel, and the spilled fuel must
be absorbed and wiped away from the ground,
the engine and the deck using a cloth.
Do not make any attempt to start the machine un-
til fuel vapours have evaporated.
Only keep the fuel in containers intended for this
purpose.
Use lead-free petrol, min. RON 91.
NOTE For more detailed information, please
refer to the separate operating instructions for the
engine.
Filling the tank
1. Switch off the engine and remove the ignition
key as a precaution.
2. To reduce the risk of explosions: Wait until
the engine has cooled down.
3. Fold the seat forward and open cover (27/1)
of the engine compartment (27/a).
4. Open tank cap (29/1) and pour fuel into tank
(29/2).
Note: Avoid overfilling the fuel tank!
5. Close the tank cap.
6. Close the engine compartment cover and fold
the seat back (27).
493357_c
17