Scope Of Supply (03); Tools Required; Assembly; Fitting Steering Wheel (04) - Al-Ko Solo R7-62.5 Instructions De Montage

GB
5. Remove the wooden blocks (02/3) from the
wheels.
6. Push the ride-on mower forwards off the pal-
let.
7. Secure the ride-on mower to prevent it from
rolling away (e.g. with wheel chocks).
NOTE Return the packaging materials to
your dealer or dispose of it in accordance with
your national environmental protection laws.

3 SCOPE OF SUPPLY (03)

The items listed here are part of the scope of
supply. Check that all items are included:
No. Component
1 Ride-on mower
2 Operator's seat
3 Frame for grass catcher
4 Steering wheel with extension
5 Bag with screws and instructions
6 Extension lever for grass catcher
7 Cover for steering column
8 Grass catcher
9 Rubber strap for starter battery
10 Starter battery 12 V, 9 Ah
11 Disengagement linkage

4 TOOLS REQUIRED

The following tools are required for assembling
the ride-on mower:
5 mm Allen key
14
Flat-blade screwdriver
Phillips screwdriver
10/11 mm spanner

5 ASSEMBLY

WARNING! Danger if assembly is not
carried out completely! Do not operate the ride-
on mower before it has been fully assembled!
Carry out all the work described in the assembly
instructions. If you are uncertain about anything,
ask a specialist to confirm that the assembly has
been carried out correctly before the machine is
started up! Check whether all safety and protec-
tive devices are in place and functioning correct-
ly!
The following assembly jobs must have been car-
ried out correctly before the ride-on mower can
be put into operation as described in the operat-
ing instructions:
1. Fitting of the steering wheel
2. Fitting of the steering column cover with igni-
tion lock
3. Installation of the operator's seat
4. Assembly of the grass catcher
5. Fitting of the grass catcher
6. Installation and connection of the starter bat-
tery
5.1

Fitting steering wheel (04)

1. Turn the front wheels to the straight-ahead
position.
2. Fit steering wheel (04/1) with the extension
on steering column (04/2, 04/a).
Note: Make sure the position is correct with
the spoke facing towards the operator.
R7-62.5 | R7-63.8 A | R7-65.8 HD
Scope of supply (03)
8/9 mm spanner