Installation - Diono Cambria 2XT Manuel D'instructions

INSTALLATION

WARNING! Unsecured objects can become flying
hazards and can cause serious injury in an accident. If
your vehicle is equipped with lower anchors, Diono
always recommends installation utilizing the LATCH/
UAS connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1. Disengage
slots and lay booster seat on its side. While
DEPRESSING
connectors away from the booster seat and extend
both straps. Do not overextend connector straps.
2. Attach both
anchors, starting with the connector that is
furthest from you. For ease of use, make sure open
end of hooks face upward during use.
1
18
LATCH/UAS
the cam lock lever,
LATCH/UAS
2
Cambria® 2XT
connectors from storage
PULL LATCH/UAS
connectors to the vehicle