Parts For Installation; Lower Anchor Installation - Diono Solana 2 Manuel D'instructions

PARTS FOR INSTALLATION

1. Lower Belt Guide
2. UAS Adjuster Straps
3. UAS Connectors
4. Cup Holder
5. Instruction Manual Storage Pocket
3
3
12
1-866-954-9786
2
2
1
5
4

LOWER ANCHOR INSTALLATION

WARNING! Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the UAS
connectors with this booster seat.
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1. Disengage UAS connectors from storage slots and
lay booster seat on its side. While depressing the
cam lock lever, pull UAS connectors away from the
booster seat and extend both straps all the way.
2. Attach both UAS connectors to the vehicle
anchors, starting with the connector that is
furthest from you. For ease of use, make sure
open end of hooks face upward during use.
3. While pushing booster against vehicle seat, pull
one adjuster strap tight and then the other. Make
sure that both UAS connectors are securely
attached to the vehicles lower anchors.
NOTE: Even with UAS connectors properly attached
and adjusted, child seat will still have movement against
the vehicle seat back and bottom.
1
2
3
diono.com
13