Backless Booster - Diono Cambria 2XT Manuel D'instructions

While this booster seat is designed to offer advanced
side-impact protection with its backrest section attached,
the seat bottom can also be used alone as a backless booster.
WARNING! Use ONLY the vehicle's
lap and shoulder belt system when
restraining the child in this booster
seat. DO NOT
WARNING! ONLY use with children
whose ears are below the top of the
vehicle seat or headrest.
1. Remove the backrest by reversing
the steps shown in "Seat Assembly."
2. Make sure both
connectors are securely attached
to the vehicle's lower anchors.
While pushing booster against
vehicle seat, pull the adjuster
straps tight.
3. The booster seat should rest
firmly on vehicle seat bottom and
touching the vehicle seat back.
The entire seat bottom should sit
flat on the vehicle seat.
use a lap belt only!
LATCH/UAS
diono.com | diono.ca

BACKLESS BOOSTER

1
2
25