Disengaging Lower Anchor Installation; Adjusting The Head Support - Diono Cambria 2XT Manuel D'instructions

DISENGAGING LOWER ANCHOR INSTALLATION

Follow the previous instructions in reverse order.
1. Reach under the bottom of the booster seat and
depress the cam lock lever while pulling the seat
away from the vehicle seat back until the lower
anchor straps are extended all the way.
2. Disconnect LATCH/UAS connectors from
vehicle anchors.
3. Pull lower anchor adjuster straps to recess the
LATCH/UAS connectors into the back of the booster
seat bottom for safe storage.

ADJUSTING THE HEAD SUPPORT

Squeeze the head support adjustment
lever on the back of the booster
seat while adjusting its height up or
down to fit the child.
diono.com | diono.ca
INSTALLATION
21