Care And Cleaning - AVS Bugflector Instructions D'installation

Installation Steps
Install (2) Scrivet fasteners with phillips
head screwdriver at the inboard holes.
9
DO NOT OVERTIGHTEN.
Apply pressure to flange to ensure proper adhesion of
11
Close hood and apply (4) bump ons to hood
13

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
hole
metal hood
hood shield
Scrivet
fastener
tape.
surface.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2010 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo, Chromeflector
TM TM
Remove remaining tape liner by pulling on
10
Turn both of the hood bumpers counter clockwise (2)
12
, and the AVS logo are trademarks of Lund International, Inc.
TM TM
Page 3 of 3
the free ends.
full turns.