Care And Cleaning - AVS LUND 25121 Instructions D'installation

Installation Steps
Check position of hood shield. NOTE: Ensure that center flanges where tape will adhere are not in contact with top of grille.
9
Press and hold hood shield against the upper surface of hood.
10
Remove adhesive backing and apply (2) bump
12

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality products offered by Lund International, Inc. We take the utmost pride in our products and
want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
™
Auto Ventshade , the Auto Ventshade
TM
NOTE: Actual application may vary slightly from illustrations.
ons to hood surface.
800-241-7219 • Visit us at lundinternational.com
© 2013 Lund International, Inc. All rights reserved.
logo, the AVS
TM
Align front of shield with front edge of hood.
Remove remaining tape liner by pulling on the free ends. Apply
pressure to flange to ensure proper adhesion of tape.
11
Lund International
logo, Lund and the Lund logo are trademarks of Lund International, Inc.
TM ® ®
Page 3 of 3
Hood shield
Grille
Hood