Applications - LEMAN SRM100 Manuel D'utilisation

- Overall dimensions with bow up (L x W x H):600 x 560 x 580 mm
- Bow's fall: Manual with retaining spring
- Bow's rise: Manual
- Swivel arm: from 0° to 45°
- Max. cutting capacities:
- Bow 0°:
- Bow 45°:
- Gross weight: 21 Kg
- Net weight: 18 Kg
- Ambiant air temperature and Storage and transportation temperature range: 0 à +40°.
Sound level according to EN 60745:
- Sound pressure level:
- Sound power level:
Uncertainty K = 3 dB(A)
Wear ear protection!
Information: The noise values indicated are emission levels and not necessarily safe operating levels. While there
is a correlation between emission levels and exposure levels, this cannot reliably be used to determine whether or
not further safety precautions are needed.
Factors which in fluence the real level of a worker's exposure include the duration of exposure, the characteristics
of the working environment, other sources of noise, for example the number of machines or operations being
carried out in the near vicinity. Furthermore, levels of safe exposure may be fixed differently from one country to
another.
This information does however help the machine user to better assess the hazards and risks.
Vibrations total value (tri-axial vector sum) according to EN 60745:
a
- Vibration main handle:
- Uncertainty K = 1.5 m/s²
WARNING! Vibrations during real machine use may differ from those declared as the total vibration value depends
on how the machine is used.
It is therefore necessary to identify the most appropriate safety measures required for safeguarding the operator
based on estimated exposure times and real conditions of use.
- This band saw is exclusively used for dry cutting of ferrous (steel, iron, cast iron) and non-ferrous materials
(copper, aluminum, brass ...), tubular, profiled or solid. This machine is not designed for cutting hardened steels.
- Only use the materials for which it was designed: it is strictly forbidden to cut other materials than those described
above, such as building materials (concrete, brick, stone, pavers, etc.), wood, PVC , plastic and derivatives.
- This machine allows making straight cuts and miter cuts up to 45 °.
- This machine operates exclusively dry, without cutting lubricant or coolant.
- This machine can be used outdoors (building site, open area, etc.) or indoors (workshop, garage, etc.).
- Thismachine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of
this.
WARNING:
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your
mains operated (corded) machine.
Round
100 mm
55 mm
No load: LpA = 87.3 dB(A)
No load LwA = 96.2 dB(A)
= 0.971 m/s²
h(HD)

APPLICATIONS

GENERAL ELECTRIC TOOL SAFETY WARNINGS
GB
Rectangle
100x105 mm
55x60 mm
Load: LpA = 88.4 dB(A)
Load LwA = 97.4 dB(A)
20