Operation; Fitting And Filling The Blender Attachment; Selecting The Speed Setting - SilverCrest SSM 550 D1 Mode D'emploi

Operation

NOTE
The motor switches off automatically as soon as the blender attachment
removed from the motor unit
machine is still switched on. The motor will then start unexpectedly as soon as
the blender attachment
Therefore:
1) Do not plug in the appliance until the blender attachment
closed and fitted on the appliance.
2) Before fitting, always ensure that the appliance is switched off or the plug
has been removed.
3) Switch off first, pull the plug out and wait until the motor has come to a
standstill before removing the blender attachment
Fitting and filling the blender attachment
1) Remove the blender attachment
2) Fill the blender attachment
blender attachment
ment
3) Place the measuring cap
clockwise.
4) Place the filled and closed blender attachment
the blender attachment
cannot start until the blender attachment

Selecting the speed setting

Once the blender attachment
motor unit
Set the switch
–
Level 1–3: liquid or semi-liquid foods, for mixing, pureeing and stirring.
–
Level 3–5: for more solid foods or for chopping.
–
Level Ice Crush/Clean: for short, powerful pulse operation, e.g. for
crushing ice cubes or cleaning. To prevent overloading the motor, the
switch
speed switch
■ 62 │
GB
. In such cases it may be easy to forget that the
is fitted.
and then press down the lid
. Ensure that the pouring spout of the blender attach-
is also closed.
in the opening in the lid and close it by turning it
slightly until you can press it down. The motor
, you can switch on the appliance:
to...
will not click into place in this setting. Therefore, hold the
in this position only for short periods.
from the motor unit
on the motor unit
is fitted flush.
is filled and sitting completely closed on the
is
is filled,
.
and remove the lid
firmly onto the
. Turn
SSM 550 D1
.