Bluetooth Pairing - Braun ActivScan 9 Mode D'emploi

Calendar view
Selecting the Calendar icon in the menu
will show your daily average month by month.
Month and year are shown at the top of the
screen.
The week starts with Monday to the left;
Saturday and Sunday are to the right of the
grey line.
Days with readings are highlighted in the
colour of the daily average (refer to the WHO
chart on Page 2) and details of a particular
day's average reading are shown on the right
hand side.
Navigate through the days of the month using
the navigation dial. You can quickly navigate through the months by going to the first (last)
day of the month, and then you will jump to the previous (next) month and so on.
On top of the screen, the small heart icon followed by a number
of readings that were taken on the selected day.
You can see all measurements for a selected day by clicking on the Enter button. The small heart
icon at the top will indicate the measurement numbers
will move to the next measurement.

Bluetooth pairing

ActivScan™ 9 is comptabile with the Braun
Healthy Heart app.
Make sure the Braun Healthy Heart app has
been downloaded onto your Smartphone
and your app is open.
To pair your device with the Braun Healthy
Heart app on your Smartphone, select the
Bluetooth icon in the menu of your
ActivScan™ 9.
Switch on the Bluetooth function on your
phone. At first time use of the Braun Healthy
Heart app, follow the on-screen instructions
to pair your device. Both app and device will
show that the connection is in progress.
When your ActivScan™ 9 is successfully paired,
the screen will display a green tick mark
If you want to pair another device with your
smartphone, go to the 'Connect device' section
of the app and follow the instructions.
8
EMMA
2
03-13-16
140
90
refers to the number
1/2 . Clicking on the Enter button
EMMA
EMMA
.
Adding, editing and deleting users
Adding a second user is necessary if you want
to share this blood pressure monitor with
another person. Each user will have his/her
16:56 own saved memories and averages.
To add a second user, select the Users icon
SYS in the menu and then select the Add User
mmHg
icon .
If two users are already created, select a user
DIA
by choosing the corresponding orange or
mmHg
blue icon; the user's name is displayed below
the icon.
75
Once selected, confirm the user with check
mark. You can edit the user's name
delete that user
the bottom the screen.
Warning: deleting a user deletes all blood pressure readings and averages for that user as well
as deleting the user name.
Settings
Your ActiveScan™ 9 can be customized to
your preferences. The first option enables
or disables the animated instructions which
are shown before taking a blood pressure
measurement.
The second option enables or disables the
user selection at power-on. Note that this
option has only an effect when two users are
active on the device.
Select the check mark
select the cross
validate option with Enter button.
Save you settings by selecting the big
checkmark sign
Information
Get information about the color coding
used for displaying measurement results.
This color coding follows the World Health
Organisation guidelines.
You can also see here the animated
instructions on how to take accurate blood
pressure measurement.
or
, using the small icons at
to enable the option;
to disable the option and
and press Enter button.
English
EMMA
9