Preparation Of Hot Milk - Dalla Corte STUDIO Notice Pour L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• Press the coffee firmly with the special manual press supplied.
• Clean the edge of the filter from any coffee residues and hook the filter
holder to the brew unit.
• Place selettore S (8 fig.2) in the desired position, L1 for single coffee and
L2 for double coffee.
Avoid putting your hands under the brew unit during operation. Do not touch
the metal parts of the brew unit or of the filter holder as they may cause
burns.

5. Preparation of hot milk

Pour some milk into a jug with handle. Insert the steam pipe (4 fig.2) into the
jug and open the steam wand (5 fig.2) relative to the steam pipe used. Close
the steam wand wen the milk temperature reaches the desired one. As soon
as this last operation is completed, clean the steam pipe with a damp cloth to
prevent the formation of milk encrustation on the wand. Drain the steam on
the grid of the tray to clean the inside of the steam nozzle from any residual
milk, and use a damp cloth to protect against possible splashes.
62 |
WARNING: BURN HAZARD

Publicité

Table des Matières
loading

Table des Matières