Dalla Corte STUDIO Notice Pour L'utilisateur page 79

WATER SUPPLY
This menu item allows you to set
whether the espresso machine will
be supplied using the water coming
from the jug or by connecting it to the
water supply.
The value will start flashing by pres-
sing the selector knob; you can adjust
the value by turning the knob. Press
the selector knob again to confirm.
The machine will disable the jug le-
vel sensor by selecting WATER; the
jug level sensor will be enabled by
selecting JUG.
TIMER
This menu item allows enabling/di-
sabling and programming the timer
function of the espresso machine.
The timer function consists in setting
an ON time at which the machine will
be enabled and an OFF time at which
the machine will be disabled. When
the machine is disabled all functions
are inhibited and therefore the power
consumption is zero. The machine
must not be switched off manually
by means of the main switch in order
to allow the timer to operate.
When the machine is off the following
screen will appear on the display.
| 79