Dalla Corte STUDIO Notice Pour L'utilisateur page 65

Daily cleaning of parts in contact with coffee
Unhook the filter holder (10 fig.2) from the brew unit (9 fig.2) every evening or at
the end of the use of the appliance, and wait for it to cool down or cool it under
running water. Remove the filter from the filter holder. Wash all these parts
with the brush supplied with the machine to prevent the formation of coffee
encrustations on both internal and external surfaces. Remove and thoroughly
wash the tray (3 fig.2) and the relative grid.
Washing of groups (daily)
In order to wash the unit, proceed as follows:
• Unhook the filter holder from the unit you want to clean, wait for it to cool
down or cool the filter holder under running water, remove the relative
filter and install the blind filter supplied with the appliance.
• Put a cleaning tablet supplied with the appliance inside the blind filter and
hook the filter holder.
• Put the selector lever in the "manual dose" position for 5 seconds and return
it to the stop position for other 5 seconds. Repeat the cycle 10 times.
• After completing the unit washing operations and before use, drain at least
200 cc of water from the washed unit without the hooked filter holder to
remove any residual detergent.
| 65