Ultimus V Interactive Software; Installation; Opening The Software - Nordson EFD Ultimus V Manuel Utilisateur

Masquer les pouces Voir aussi pour Ultimus V:

Table des Matières

Les langues disponibles

Annexe B — Protocole RS-232 (suite)

4. Ultimus V Interactive Software

The Ultimus V Interactive Software facilitates RS-232 communication. It is especially useful for bulk editing of the

Dispense Time, Dispense Pressure, Vacuum, and Trigger Value settings.

NOTE: For physical connection instructions, refer to "1. Physical Connection" on page 39.

Download the Ultimus V Interactive software from the following address:

https://www.nordson.com/en/divisions/efd/contact-us/ultimus-interactive-software

NOTE: The name of the file will be "UltimusVInteractive_3_0_Installer.zip," or a higher version.

Unzip the file in the folder where you want to store the program.

Open the "UltimusV_Interactive_Remastered.exe" file from inside the extracted folder.

You should see the following elements (as shown from the bottom left corner of the software screen):

• Connection status messages from the Ultimus V Interactive software to the Ultimus V dispenser:

- Not Connected to Ultimus V

- Connect First!

- Connected to Ultimus V

• COM port number (COM1, COM2, COM3, etc.)

• Baud Rate selected: 115200, 38400, 19200, 9600

• Operator Mode / Supervisor Mode

www.nordsonefd.com/fr EFDEU-South@nordson.com

+33 (0) 1 30 82 68 69 Les services et les points de vente des systèmes de dosage Nordson EFD sont présents dans le monde entier.

Doseur de Fluide Haute Précision Ultimus V

Table des Matières