Deposit Count Clear Command; Reset Auto Increment Command; Auto Increment Mode On / Off Command - Nordson EFD Ultimus V Manuel Utilisateur

Annexe B — Protocole RS-232 (suite)

2.6.2.15 Deposit Count Clear Command

This command resets the deposit counter on the dispenser to all zeros.
Client command and data: (STX) + 04 + EA-- + D6 + (ETX)
The above text packet in hexadecimal format:
STX 0 4
0x02 0x30 0x34

2.6.2.16 Reset Auto Increment Command

This command resets the Auto Increment functions. The dispenser will set the Memory Address to the Start Address
Value, reset the counters, and clear the auto increment alarm. If the dispenser is not in counter or timer mode, the
dispenser returns a Failure Command (
Client command and data: (STX) + 04 + SE-- + C4 + (ETX)
The above text packet in hexadecimal format:
STX 0 4
0x02 0x30 0x34

2.6.2.17 Auto Increment Mode On / Off Command

This command enables or disables the Auto Increment Mode. When enabling the Auto Increment Mode, the
dispenser will enable to Count Mode.
NOTE: This command is not necessary to enable Auto Increment Mode. The Auto Increment Mode command
(2.6.2.18) can be used instead.
Client command and data: AI--i
i:
Enable Command. 0=OFF, 1 = ON
EXAMPLE: To enable the Auto Increment Mode, the text packet is: (STX) + 05 + AI-- + 1 + A0 + (ETX)
The above text packet in hexadecimal format:
STX 0 5
0x02 0x30 0x35
www.nordsonefd.com/fr EFDEU-South@nordson.com
E A space space
0x45 0x41 0x20 0x20
A2 ) text packet.
S E space space
0x53 0x45 0x20 0x20
A I space space
0x41 0x49 0x20 0x20
+33 (0) 1 30 82 68 69 Les services et les points de vente des systèmes de dosage Nordson EFD sont présents dans le monde entier.
Doseur de Fluide Haute Précision Ultimus V
D 6 ETX
0x44 0x36 0x03
C 4 ETX
0x43 0x34 0x03
1 A 0 ETX
0x31 0x41 0x30 0x03
57