Description And Specifications, Standard Equipment; Description; Specifications - RIDGID 300 Manuel De L'opérateur

300 Power Drive
Figure 1 – Locked Foot Switch
Description, Specifications and
Standard Equipment

Description

The RIDGID Model 300 Power Drive is an electric
motor-driven machine which centers and chucks pipe,
conduit and rod (bolt stock) and rotates it while thread-
ing, cutting and reaming operations are performed.
Forward (clockwise) or Reverse (counterclockwise)
rotation can be selected with the FOR/OFF/REV switch
and a foot switch provides ON/OFF control of the motor.
The threading, cutting and reaming operations can be
performed by conventional hand tools or tools designed for
mounting on the Power Drive. A manual oiling system is
available to flood the workpiece with thread cutting oil dur-
ing the threading operation. Geared Threaders can also be
used with the Power Drive to thread larger diameter pipe.
The RIDGID Model 300 Power Drive can also be used
as a power source for roll grooving equipment. Designed
to attach to the support arms of the Power Drive, the roll
grooving equipment forms standard roll grooves on a
variety of pipe sizes and materials.
NOTE! Contact a RIDGID distributor or consult the
RIDGID catalog for specifications on roll groov-
ing equipment.

Specifications

Threading Capacity .......Pipe
Bolt
Geared Threaders:
Pipe 2
Chuck ............................Speed Grip Chuck with
Replaceable Jaw Inserts
Rear Centering Device....Cam Action Rotates with
Chuck
Operating Speed ............38 RPM or 57 RPM
Motor:
Type ............................Universal
Horsepower................. 1
4
" through 2"
1 /
8
" through 2"
1 /
4
" through 6"
1 /
2
/ HP
2
Volts ............................120V Single Phase AC
Amps...........................15 Amps (36 RPM)
Controls .........................FOR/OFF/REV Switch and
Weight............................77 lbs.
Figure 2 – No. 300 Power Drive and No. 1206 Stand
Standard Equipment
Power Drive Only:
• 300 Power Drive
Power Drive Complete:
• 300 Power Drive
• 1206 Stand
• 311 Carriage with Lever
• 341 Reamer
• 360 Cutter
• 811A Universal Die Head
" –
• Set 1 /
2
• Set 1" – 2" Universal Alloy Dies
• 4 oz. Can White Sealant w/ Teflon
Ridge Tool Company
25-60 Hz
(230V Available On Request)
18 Amps (57 RPM)
ON/OFF Foot Switch
" Universal Alloy Dies
3 /
4
®