Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment - RIDGID 1224 Mode D'emploi

1224 Threading Machine
Figure 1 – Locked Foot Switch
Description, Specifications and

Standard Equipment

Description
The RIDGID Model 1224 Threading Machine is an elec-
tric motor-driven machine which centers and chucks
pipe, conduit and rod (bolt stock) and rotates it while
threading, cutting and reaming operations are performed.
Left-hand or right-hand rotation can be selected with
the FOR/OFF/REV switch. Threading dies are mounted
in a self-opening die head. An automatic oiling system is
provided to flood the work with thread cutting oil during
threading operations. Blade-type cutter is available to strip
and cut-off saran and plastic-lined pipe. A Geared
Threader can also be used with the Threading Machine
to thread 4-6" diameter pipe.
The RIDGID Model 1224 Threading Machine can also be
used as a power source for roll grooving equipment.
Designed to attach to the carriage rail of the Threading
Machine, the roll grooving equipment forms standard
roll grooves on a variety of pipe sizes and materials.
Die Head is also available to cut groove and bevel pipe
through 4" in diameter.

Specifications

Threading Capacity .......Pipe
Bolt
Geared Threader: Pipe 4" – 6"
Chuck ............................Hammer-Type Chuck with
Replaceable Jaw Inserts
Rear Centering Device...Scroll operated, rotates with
chuck
Gear Box .......................Two-Speed Gear Box 3:1 Ratio
Operating Speed ...........36 RPM –
12 RPM – 2
– High Torque Application
Such As Stainless Steel or
R c 30 Rod
4
1 / " through 4"
4
/ " through 2"
1
4
1 / " - 2" Pipe
4
1 / " - 4" Pipe
2
Motor:
Type ............................Induction-Type,
Horsepower .................1
Volts ............................120V Single-Phase, 60 Hz
240V, Single-Phase, 60 Hz
115V/220V/240V
Single-Phase, 50 Hz
Amps ...........................15 amps (120V)
Controls .........................Rotary Type FOR/OFF/REV
Switch and ON/OFF Foot Switch
Pump .............................Gerotor-Type, Self-Priming
Cutter.............................No. 764 – Roll-Type Cut-off,
Self-Centering, Full Floating
Reamer..........................No. 744
Right Hand
Weight ...........................509 Lbs.
Standard Equipment
Model No. 1224 Threading Machine with Foot Switch
1 – No. 714 (914) 2 1 / " – 4" Receding Self-Opening Die
2
Head
1 – No. 711 (911) 1 / " – 2" Universal Self-Opening Die
4
Head
1 – Set / " – / " Universal Alloy Dies
1 3
2 4
1 – Set 1" – 2" Universal Alloy Dies
1 – Set 2 1 / "-4" 1224 High Speed Dies
2
1 – Gallon Nu-Clear Oil*
3 – Hex Keys
1 – Spare F-229 Cutter Wheel
1 – 3 / " Combination Wrench
4
1 – Tool Box
1 – No. 744 Reamer
1 – No. 764 Cutter
1 – 4 oz. Can White Sealant w/PTFE
Standard Machines
Catalog Model
No. No. Description
26092 1224 1/2" – 4" NPT
26097 1224 1/2" – 4" NPT
26127 1224 1/2" – 4" BSPT
26112* 1224 1/2" – 4" BSPT
26122 1224 1/2" – 4" BSPT
26107* 1224 1/2" – 4" BSPT
26102 1224 1/2" – 4" BSPT GS
31442* 1224 1/2" – 4" NPT
* Catalog numbers 26112, 26107 and 31442 do not include oil with machine.
Oil must be ordered separately.
1 / HP
2
1 / " - 4" Blade-Type,
4
Volt
120V 60Hz
240V 60Hz
120V 60Hz
115V 50Hz
240V 60Hz
220V 50Hz
220V 50Hz
220V 60Hz