Description, Specifications And Standard Equipment Description; Specifications; Standard Equipment; Accessories - RIDGID 1215 Manuel

1215 Threading Machine
Figure 1 – Locked Foot Switch
Description, Specifications and

Standard Equipment

Description
The RIDGID Model 1215 Threading Machine is an electric
motor-driven machine that centers and chucks the pipe
and rotates it while cutting, reaming and threading oper-
ations are performed. Threading dies are mounted in
self-opening, quick-opening or semi-automatic die heads.
An integral oiling system is provided to flood the work
with thread cutting oil during the threading operations.

Specifications

Threading Capacity .......Pipe
Bolt
Chuck ............................Speed Grip Chuck with
Replaceable Jaw Inserts
Rear Centering
Device ...........................Scroll Operated, Rotates with
Chuck
Operating Speed ...........44 RPM (No-Load)
Motor:
Type ............................Universal
Horsepower.................1/2 HP
Volts ............................115V Single Phase AC 50-60
HZ (230V On Request)
Amps...........................14 Amps
Controls .........................Rocker Type ON/OFF Switch
and ON/OFF Foot Switch
Pump .............................Gerotor-Type
Material Capacity...........Black, Galvanized, Stainless
Steel, Cast Iron, IMC, PVC,
Heavy Wall Conduit. Rod Up
to 30 Rockwell C and Plastic
Coated Pipe.
Weight ...........................69 lbs.
4
" through 1 "
1 / 1 /
4 2
" through 1"
5 /
16
Standard Equipment
• 811A Quick Opening Die Head
"– " Alloy Universal NPT Dies
• 1 / 3 /
2 4
" Alloy Universal NPT Dies
• 1"–1 1 /
2
• 344 Five Fluted Reamer
• 732 Cutter (Roll Type Cut-Off, Self-Centering)
• 1 Gallon NuClear Oil
Model No. Cat. No. Description
" - 1
1215 61142 1 /
2
" - 1
1215 56087 1 /
4
NPT Export Only
" - 1
1215 56092 1 /
4
" - 1
1215 56097 /
1
4
No Die Head, Export Only
" - 1
1215 56102 1 /
4
BSPT Export Only
Machine Accessories
Model No. Cat. No. Description
1230 61187 Tripod Stand
1219 62457 Nipple Chuck, NPT
1219 62462 Nipple Chuck, BSPT
531 97045 Bolt Die Head
" -
816 84537 1 /
4
817 84532 1" - 1
NOTE! NPT Dies are for NPT Die heads only. BSPT
Dies are for BSPT Die Heads only. Please use
Catalog Item Nos. when ordering.

Machine Mounting

WARNING
To prevent serious injury, proper mounting of the
Threading Machine is required. The following pro-
cedures should be followed:
Mounting Machine To No. 1203 Leg Stand
1. Assemble the 1203 stand by placing the legs into
the sockets on the bottom of the base.
2. Secure the legs by inserting the bolts through holes in
the base and tighten with the nuts provided.
3. Mount the machine to the stand using the three (3)
bolts provided. Make sure the stand and base are
stable.
WARNING Machine should not be operated without
being securely fastened to the stand.
"–1 " NPT
/ /
1 1
4 2
"–1 "
1 / 1 /
4 2
" NPT, 115V, 60Hz
1 /
2
" 230V, 25-60Hz
1 /
2
" BSPT 230V, 25-60Hz
1 /
2
" 115V, 25-60Hz
/
1
2
" 230V, 25-60Hz
1 /
2
" - 1"
1 /
4
" Semi-Automatic Die Head
3 /
4
" Semi-Automatic Die Head
1 /
2