Würth EWS 10-125 COMPACT Traduction Des Instructions De Service D'origine page 26

CAUTION!
Risk of injuries or property damage due
to improper actions.
Do not open the device.
¾
The device must only be opened by a
¾
Würth service technician.
Observe the relevant safety and
¾
accident prevention regulations
during all maintenance and servicing
work.
Troubleshooting
Machine not running. Electronic signal dis-
play (depending on configuration) flashes:
The restart protection device has tripped. If the mains
plug is inserted with the machine switched on, or if
the power supply is restored after an interruption, the
machine does not start.
▸
Switch the machine off and on again.
Accessories and spare parts
If. in spite of careful manufacturing and testing pro-
cesses, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the name plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Disposal
Do not throw the device away with
normal household waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regulations. In case of
doubt, contact your waste disposal facility. Dispose
of all packaging in an environmentally sound
manner.
26
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer
service workshop. We reserve the right to make
technical changes. We accept no liability for printing
errors.
EC Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 60745
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• to 19.04.2016: 2004/108/EC,
from 20.04.2016: 2014/30/EU
• 2011/65/EU
Technical documentation with:
Adolf Würth GmbH & Co. KG, Abt. PCM
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
M. Strobel
Head of
Product Management
Künzelsau: 10.11.2015
Dr.-Ing. S. Beichter
Head of Quality,
Authorized Signatory