Replacing The Cutting Line; Removing/Inserting The Battery; Selecting The Speed - Milwaukee M18 FUEL Manuel De L'utilisateur

14"
Adjusting the Cutting Diameter
16"
Recharge only with the charger
WARNING

Removing/Inserting the Battery

To remove the battery, push in the release buttons
WARNING
changing or removing accessories.
To insert the battery, slide the pack into the body
WARNING
wheels, accessories, or attach-
MILWAUKEE. Serious injury or product damage
may occur.
14"
16"

Replacing the Cutting Line

abrasive surfaces or in dense growth, the cutting
Turn the trimmer head over
and remove the spool by
Pull the cover away from
Remove the spool from
Clean any grass or debris from the spool, cover,
CAUTION: When replacing the line, use only
center of the line and loop
through the notch in the
-
Wind the line in the direc-
Both ends of the line wind
in the same direction in
When the end of the line
is reached, secure the
in the notches at the top
Line up the spool's notch-
es with the metal eyelets
in the cover and push the
Pull each of the ends of
the line out of the spool
notches and insert into
Check that the
exposed line ex-
tends no further
t h a n t h e l i n e
posed line is too
long, trim before

Selecting the Speed

Use the speed control button to select Low (1) or
5
1
Notches
-
-
2
1
-