Care And Cleaning - AVS Ventvisor Deflector Instructions D'installation

Installation Steps
6 Piece Set
Remove tape liner from Extended Rear Visor.
free end
10
Gently press the exposed areas of tape against the surface and
verify position. With the visor in its final position, remove the re-
maining tape liner by pulling on free ends.
12
Repeat Steps 1 - 13 for opposite side.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade™, the Auto Ventshade™ logo and the AVS™ logo are trademarks of Lund, Inc.
™
NOTE: Actual application may vary slightly from illustrations.
top flange
front flange
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2020 Lund, Inc. All rights reserved.
Align the deflector on the outside of the door frame. Align the front of
the Extended Rear Visor parallel to the previously installed Rear Visor.
align
11
Apply pressure along all flanges to ensure proper adhesion of tape.
13
The material that your product is made from can
be recycled. Please also consider recycling the
Page 3 of 3
packaging that your product came in.