Listes Des Paramètres - Filtre Actif - Danfoss VLT AutomationDrive FC 302 Low Harmonic Drive Manuel D'utilisation

Programmation
6.4 Listes des paramètres - filtre actif
6.4.1 0-** Fonction./Affichage
N° par. # Description du paramètre
0-0* Basic Settings
0-01 Language
0-04 Operating state at power-up (hand)
0-1* Set-up Operations
0-10 Active set-up
0-11 Edit set-up
6 6
0-12 This set-up linked to
0-13 Readout: Linked set-ups
0-14 Readout: Edit set-ups/channel
0-2* LCP Display
0-20 Display line 1.1 small
0-21 Display line 1.2 small
0-22 Display line 1.3 small
0-23 Display line 2 large
0-24 Display line 3 large
0-25 My personal menu
0-4* LCP Keypad
0-40 [Hand on] key on LCP
0-41 [Off] key on LCP
0-42 [Auto on] key on LCP
0-43 [Reset] key on LCP
0-5* Copy/Save
0-50 LCP copy
0-51 Set-up copy
0-6* Password
0-60 Main menu password
0-61 Access to main menu w/o password
0-65 Quick menu password
0-66 Access to quick menu w/o password
110
Manuel d'utilisation
Valeur par défaut
[0] English
[1] Forced stop
[1] Set-up 1
[1] Set-up 1
[0] Not linked
0 N/A
0 N/A
30112
30110
30120
30100
30121
ExpressionLimit
[1] Enabled
[1] Enabled
[1] Enabled
[1] Enabled
[0] No copy
[0] No copy
100 N/A
[0] Full access
200 N/A
[0] Full access
Danfoss A/S © Rév. 2014-02-07 Tous droits réservés.
4 process Changement Indice de
pendant le conversion
fonction-
nement
1 set-up TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
1 set-up TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups TRUE
All set-ups FALSE
All set-ups FALSE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
1 set-up TRUE
Type
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Uint16
0 Int32
- Uint16
- Uint16
- Uint16
- Uint16
- Uint16
0 Uint16
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
- Uint8
0 Int16
- Uint8
0 Int16
- Uint8
MG37A204