Eaton CROUSE-HINDS Serie Mode D'emploi page 17

Variations
Protection category acc. to IEC/EN 60529:
Insulation class acc. to IEC/EN 61140:
Photobiological safety according to EN/IEC 62471:
Total Harmonic Distortion (THD)
Supply terminal clamping capacity
Standard CEAG terminal (2 x per terminal)
min.:
max.:
Alternative WAGO terminals
Ex-e cable entry
Standard version (plastic)
Suitable cables and test torques of the pressure
screw
1 2
Seal 1+2+3
1 2
Seal 1+2
1 2
Seal 1
Testtorque:
Screw-in thread Ex-e cable entry M25
Fixing - screws
Wight:
(4)
The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can vary by using cables with different manufacturing tolerances
and material properties. Please use a suitable combination of seals in the intermediate area. so that the cap nut can be tightened in future maintenance work on the cable
entry.
Explosion protected emergency light fittings ExLin NE+
3L - 1
IP 66/67
I
RG 1
8 %
single-
wire
1.5 mm
6.0 mm
0.5 mm
4.0 mm
Observe the specifications of the ambient temperature range on the ExLin NE+ type lable.
M25 x 1,5
Ø cable
min. 8.0
3
(4)
max. 10.0
min. 10.0
3
(4)
max. 13.0
min. 13.5
3
(4)
max. 15.0
3.0 Nm
3.5 Nm
3L - 1
8.3 kg
5L - 1
5 %
multi-
wire
1.5 mm
2 2
4.0 mm
2 2
0.5 mm
2 2
4.0 mm
2 2
Nm pressure screw
1.5
2.0
2.3
2.6
1.3
2.3
5L - 1
8.3 kg
GB
17