Télécharger Imprimer la page

JVC KD-NX901 Manuel D'instructions page 107

Système de navigation à disque dur/recepteur dvd
Masquer les pouces Voir aussi pour KD-NX901:

Publicité

Les langues disponibles

Les langues disponibles

Disc operations
General
• In this manual, words "track/file" and "folder/
album" are interchangeably used when
referring to MP3/WMA files and folders.
• On some discs, the actual operations may
be different from what is explained in this
manual.
• This receiver can also play back 8 cm discs.
• This receiver can only play back audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
– The first track will be skipped if a different
type of file is detected first.
• For DVD-R/DVD-RW: This receiver can
play only discs recorded in the DVD-Video
format. (Discs recorded in the DVD-VR
format cannot be played.)
• When a disc has been loaded, selecting
"DISC" for the playback source starts disc
play.
Inserting a disc
• When a disc is inserted upside down, the disc
will eject automatically.
Basic operations
• No sound comes out during slow motion
playback. When playing a VCD, reverse slow
motion playback is prohibited.
• One Touch Replay works only within the
same title. (For some DVDs, this function
does not work.)
• When playing a DVD/VCD, no sound comes
out during Search.
• Reverse search stops automatically when it
reaches the beginning of the disc. Playback
resumes at normal speed.
Playing a DVD-R/RW or CD-R/RW
• Use only "finalized" DVD-R/RWs or CD-R/
RWs.
• If no playable files are recorded in a folder,
the folder will not be recognized.
• This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some DVD-R/RWs or CD-R/RWs may not
play back on this receiver because of their
disc characteristics, and for the following
causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/RWs on which the files are written
with "Packet Write" method.
– DVD-R/RWs which are not written in
UDF-Bridge Format (ex. UDF format or
ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stain, scratch, warp, etc.).
• DVD-RWs or CD-RWs may require a longer
readout time since the reflectance of DVD-
RW and CD-RW is lower than that of regular
discs.
• Do not use the following DVD-R/RWs or
CD-R/RWs:
– Discs with stickers, labels, or protective
seal stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.
To be continued....
107

Publicité

loading