Publicité
Les langues disponibles
Les langues disponibles
GB
Car seat installation
1. Remove the seat: Press the button on each side at same time and pull out the
seat.
2. lnstall the adapter on car seat in direction of the arrow, distinguish the left
and right adapter when installing.
3. Insert the car seat adapter into the frame sockets, the car seat install in place
when you hear 'click 'sound.
• The car seat can be installed in reverse direction.as shown in picture c.
• Disassemble the car seat:
• Press the button on each side together and pull out the car seat
• Disassemble the car seat adapter: Press the red button on the side of car seat
to disassemble the adapter.
1. Canopy adjustment: Pull the handle forwards to open the canopy, the canopy
is in place when you hear a 'click' sound. To close the canopy, press each side
buttons at the same time, and push down the canopy.
2. lnstall foot cover: Put the foot cover on carry cot, and fasten the snap-faste-
ners.
Carry cot installation:
1. Remove the stroller seat from the frame. Insert the carry cot plug into the
frame socket. The carry cot is in place when you hear 'click' sound.
2. Disassemble the carry cot: Press the side buttons on carry cot plug at the
same time, and pull out the carry cot.
Warning! This product is suitable for children that cannot sit up or turn over
unaided and that cannot push themselves with their hands and knees.
Maximum weight of child: 9 kg.
Do not add an additional mattress.
19
Publicité
