Télécharger Imprimer la page

JANE Nurse VOYAGER Instructions page 17

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
GB
1
Open the frame: Pull the handle bar upwards to lift the frame. Frame is com-
pletely opened when you hear "click" sound.
2
lnstall front wheels: Insert the front wheels into the wheel bracket, the wheel
is in place when you hear "click" sound. (Press the quick release button for
removing the front wheels.)
3
lnstall rear wheels: Insert the rear wheels into the wheel bracket, the wheel
is in place when you hear "click" sound. (Press the quick release button for
removing the rear wheels.)
4
lnstall basket. Put the basket on the rear rod wrap it by hook&loop. Then
close the left and right zipper on basket.
5
lnstall the front bumper: Insert it to connector on each side of stroller until
you hear "click" sound.
5a
Disassemble the front bumper: Press the side button on left and right side
together, and pull out the front bumper.
6
Top window use:
Open the top window to check the child inside the stroller.
7
Canopy use:
Pull forward to open the canopy. Pull backward to close the canopy.
8
Canopy adjustment:
The canopy will be extended after opening the canopy zipper.
9
Seat installation:
The seat can be installed in double sides. As shown in picture 9, insert the seat
plugs into the left and right frame sockets. The seat install in place when you
hear "click" sound.
Press the left and right button at same time, and pull out the seat to disassem-
ble it.
10
Push handle adjustment:
Press the button on the push handle to adjust the height. The push handle
height is 5 levels.
11
Directional Front wheels:
Press down the button to fix the direction. Lift up the button to release the
wheels.
Adjust safety belt length:
12
Regulate the length of the safety belts by pulling the clasps all the way.
13
Put the shoulder and waist belts together and place them in the central buck-
ling clasp. To unlock the belts, press the button on the central clasp.
14
To place the stroller in stationary position. use the packing device of rear
wheels, by pressing down the pedal located on the rear axis. To release the
parking device press forward the upper part of the pedal.
17

Publicité

loading