Use - Miele HS16 Mode D'emploi

en
Using the adjustable floorhead
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
This floorhead can be used for all nor-
mal cleaning of carpets and rugs. It is
also particularly suitable for vacuuming
hard flooring which is not susceptible to
scratching.
To adjust the floorhead (dia. 07 + 08)
Vacuum carpets and rugs with the
brush retracted:
 Press the  foot control.
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the  foot control.
Using the SRD hard floorbrush
(depending on model)
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
This hard floorbrush is especially suit-
able for vacuuming floors with deep
gaps and crevices, e.g. old wooden
flooring.
36
Using the accessories supplied
(dia. 09)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, covers
etc.
 Dusting brush/Dusting brush
with natural bristles, supplied
loose
(depending on model)
(only available in selected coun-
tries)
For cleaning skirting boards, as
well as ornate, carved or particu-
larly delicate objects.
The head can be swivelled to ad-
just the angle.
The crevice nozzle and the upholstery
nozzle are located in holders at the rear
of the vacuum cleaner.
Standard adjustable floorhead
(dia. 10)
For general use and also for vacuuming
the stairs.

For safety reasons when vacu-
uming stairs it is best to start at the
bottom of the stairs and move up-
wards.

Use

Unwind the mains cable (dia. 11)
 Pull the mains cable out to the re-
quired length.