Electrobrush Operating Instructions; Preparing For Use - Miele HS16 Mode D'emploi

Electrobrush operating instruc-
tions
Your vacuum cleaner is equipped with
an Electrobrush as standard. Please
read the separate operating instructions
supplied with the Electrobrush before
using it for the first time.

Preparing for use

Attach the suction hose (dia. 01)
 Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into position.
To detach the suction hose (dia. 02)
 Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the Comfort handle to the
telescopic tube (dia. 03)
 Insert the Comfort handle into the
telescopic tube until it clicks into pos-
ition.
 Press the release button to separate
the individual sections from each
other.
Adjust the telescopic suction tube
(dia. 04)
One part of the telescopic tube is
packed inside the other and can be ad-
justed to suit your height for comfort-
able vacuum cleaning.
 Press the release button and adjust
the tube to the desired height.
Connect the telescopic suction tube
to the Electrobrush (dia. 05)
 Insert the telescopic suction tube into
the Electrobrush until it clicks into po-
sition.
Using the Electrobrush
Please observe the flooring manu-
facturer's cleaning and care instruc-
tions.
The Electrobrush is particularly suitable
for intensive vacuuming of carpets
which are subject to hard wear.

The Electrobrush should not be
used for vacuuming deep-pile rugs
and carpets or valuable hand-knot-
ted rugs and carpets, e.g. Persian
and oriental rugs etc. There is a
danger of the threads being pulled
out.
For further information on use and
maintenance please refer to the separ-
ate instructions supplied with the Elec-
trobrush.
Connect the telescopic tube to the
floorhead (dia. 06)
 Push the telescopic tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into posi-
tion.
 To detach the floorhead from the suc-
tion tube press the release button
and pull the suction tube away from
the floorhead, twisting it slightly as
you do so.
en
35