Correct Use - Miele HS16 Mode D'emploi

en - Warning and Safety instructions

Repairs should only be carried out by a Miele authorised service
technician. Repairs and other work by unqualified persons can cause
considerable danger to users.

Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
Cleaning

Do not let the vacuum cleaner, the Electrobrush, the telescopic
suction tube and the suction hose get wet.

The Electrobrush, telescopic suction tube and suction hose con-
tain electrical cables. The plug connectors must not come into con-
tact with water. Danger of electric shock. They should only be
cleaned with a dry cloth.

Clean the vacuum cleaner and accessories only with a dry cloth or
slightly damp cloth. Exception:
– Dust container / fine dust container: clean only with water and a
little mild washing-up liquid, then dry thoroughly.
– Fine dust filter: do not clean the inside of the fine dust filter. Rinse
the outside under running cold water. Do not use washing-up li-
quid. Do not use any sharp or pointed objects and do not brush
the fine dust filter. After cleaning, leave the fine dust filter to dry
for a minimum of 24 hours before placing it back in the fine dust
container.
– Pre-filter / filter frame: rinse under running cold water. Do not use
washing-up liquid. Do not use any sharp or pointed objects. Dry
thoroughly after cleaning.

Correct use


Do not use the vacuum cleaner without the dust container, pre-fil-
ter, fine dust container and fine dust filter fitted.
28